3D Scanning for Optimal 3D Printing Results: How Additive Manufacturing Can Step in to Print Emergency Replacement Parts

Technological innovation in the U.S. military revolutionizes defense, response to natural disasters, and so much more but also creates unique challenges. Learn how 3D scanning combined with additive manufacturing can step in to print emergency replacement parts.

As technology is updated, some systems may be state of the art but due to unproven technology, expensive manufacturing costs, or supply chain issues, many are still the last generation. As a result, the military can’t shut down the supply chain for those older assets.

For example, there might be ground-breaking vehicle designs coming on-line, but the designs from the last generation remain in use because they have proven to be very effective at what they do.

In these situations, manufacturers and subcontractors may no longer produce replacement or maintenance parts for outdated equipment.

So, what happens when the U.S. military finds it needs a part for a system that no longer exists?

Usually, a third-party vendor would be commissioned to reverse engineer the part to create a new mold. This time consuming, manual, and expensive process is ripe for human error where the slightest miscalculation yields an imperfect result, which sends engineers back to the lab for the next iteration.

This process may ultimately take weeks or months, until an acceptable replacement part is iterated.

Today’s advanced 3D scanning and AM technologies offer another choice. Now, the part in question can be precisely scanned for an accurate reproduction of part geometry.

This data can then be imported into CAD software and prepared for output on a 3D printer. All in-house, all in a matter of hours, for an exact reproduction on the first try.

This one-stop shop solution provides the agility that geographically isolated bases need when access to inventories of spare parts is limited.

When a military vehicle breaks down in the middle of a mission there needs to be ready access to parts that can get the vehicle operational again, or at least affect a temporary fix in order to get it to a maintenance facility for proper repair.

Can’t get the part off the vehicle to bring in for scanning? Portable 3D scanners are available to capture data in the field to reproduce the part back at the base.

Proof-of-Concept: Demonstrating How 3D Scanning and Additive Manaufacturing Can Keep the U.S. National Guard Moving

The premises for these proof-of-concept examples are rooted in actual events. Although these solutions have yet to be actually implemented, they represent real-world applications of how AM can step in to print emergency replacement parts.

Radiator Cooling Fans

When hurricanes devastate the coastline, the National Guard is called on to help. Driving military vehicles through floodwaters of unknown depth is dangerous. Should the vehicle suddenly encounter water high enough to reach crucial parts like the radiator cooling fan, those spinning plastic fan blades can break off after being submerged. Once back on dry land, the engine quickly overheats, rendering the vehicle useless. Switching off the fan is a precaution that service members take but it can be forgotten or remembered too late.

Rather than trying to procure a replacement fan through traditional supplier channels – a process that could take days – Essentium demonstrated how it could print a full-size radiator fan in one piece on the Essentium High Speed Extrusion (HSE) 3D Printer that could restore vehicle serviceability in a matter of hours. Instead of waiting for suppliers to ship parts to areas that may not be reachable for days, the part could be printed at the nearest National Guard base.

Rubber Bushings

Another example of AM stepping in for emergency-use replacement parts is the rubber bushings on the suspension systems of the National Guard’s emergency use vehicles. After lengthy exposure to extreme conditions, they can corrode and fall apart. Continued use in this condition can do costly damage to the suspension system as well as expose personnel to unnecessary safety risks.

But sometimes there’s no choice. When a crisis occurs and vehicles are needed for duty, they must go. Having the ability to 3D scan bushings before they deteriorate beyond repair and print replacements on demand goes a long way towards keeping those vehicles operational. While the manufacturer’s original bushing may be designed to last for 200,000 miles, for example, and the 3D printed replacement bushing may only last 20,000 miles, that’s long enough to get through the crisis before taking the vehicle.

3D Scanning for Emergency Use Authorization

The U.S. military has an emergency use authorization clause that allows them to reverse engineer any part during a crisis to maintain operational status without legal exposure. This is how 3D scanning together with AM can be a cost- and time-effective alternative to traditional reverse engineering methods. In fact, the U.S. military is actively creating a digital repository of emergency use parts that could be 3D printed to implement temporary repairs.

Essentium is a manufacturer of High Speed Extrusion industrial-class 3D printers, as well as an entire portfolio of engineering-grade materials that can produce the replacement parts needed to keep the U.S. military in action during an emergency.

In conjunction with 3D scanning, the Essentium HSE 3D Printing Platform delivers the size to print large items like radiator fans in one piece, with the speed and accuracy needed to urgently respond to any situation.

For more information on how Essentium AM can keep your wheels turning in a crisis, download our white paper, Crawl, Walk, Run: Adoption of AM in the Defense Industry, for a deeper dive into the process of 3D scanning for optimal 3D printed results.